MMSI SETTINGS

SAILOR RT4801 & SKANTI TU1000P MMSI Number Change Procedure SAILOR RT4801 & SKANTI TU1000P MMSI Number Change Procedure Since the software originally prepared by the factory for this product is very old and cannot be run on modern operating systems, you can access the MMSI change procedure developed and tested by Marc Bunyard from the […]

JRC JHS 770S VHF DSC MMSI Number Change Procedure JRC JHS 770S VHF DSCMMSI Number Change Procedure 1- Turn off the device. 2- Turn it back on by pressing the Menu button. 3- Enter the Initial Settings menu and change the MMSI number. Check Product

JRC JHS 32A/B VHF DSC MMSI Number Change Procedure JRC JHS 32A/B VHF DSCMMSI Number Change Procedure 1- Turn off the device and open the front cover. 2- Set Switch 1 (labeled “S1”) on the front cover to the ON position. 3- Turn on the device and enter the Installation Setup menu. Change the MMSI

FURUNO FS1575 / FS2575 / FS5075 MF-HF DSC MMSI Number Change Procedure FURUNO FS1575 / FS2575 / FS5075 MF-HF DSCMMSI Number Change Procedure 1- While powering on the device, press and hold the “S1” switch on the T-IF board until the MMSI Setup screen appears. 2- The MMSI setup screen will be displayed. 3- Enter

FURUNO FS1570 / FS2570 MF-HF DSC MMSI Number Change Procedure FURUNO FS1570 / FS2570 MF-HF DSCMMSI Number Change Procedure 1- Turn off the device. 2- While pressing the NMI switch on the T-CPU board inside the transceiver, turn the device on. 3- Enter the password “652111”, select MMSI CLEAR, and then enter the new MMSI

FURUNO DSC6 / DSC6A MF-HF DSC MMSI Number Change Procedure FURUNO DSC6 / DSC6A MF-HF DSCMMSI Number Change Procedure 1- Turn off the device and open the front cover. 2- While pressing the NMI switch, turn the device on. 3- Turn the device off again. 4- Turn the device on without pressing the NMI switch.

FURUNO FM8900 VHF DSC MMSI Number Change Procedure FURUNO FM8900 VHF DSCMMSI Number Change Procedure 1- Turn off the device. 2- Disconnect the junction jack located at the back of the unit. 3- Short-circuit pins 6 and 23 of the junction jack. 4- Turn the device back on. The Initialize Setup menu will appear. 5-

FURUNO FM8800 VHF DSC MMSI Number Change Procedure FURUNO FM8800 VHF DSCMMSI Number Change Procedure 1- Turn off the device. 2- Short-circuit pins 2 and 15 of the printer jack. 3- Turn on the device. Navigate to the ID menu, enter the password “652111”, then press ENTER and change the MMSI number. 4- Remove the

FURUNO FM8500 VHF DSC MMSI Number Change Procedure FURUNO FM8500 VHF DSCMMSI Number Change Procedure 1- Turn off the device and open the front cover. 2- While pressing the NMI switch (S1) , turn the device on. 3- Turn the device off again. 4- Turn the device on without pressing the NMI switch  5- Select

FURUNO FA-150 AISShip Information / MMSI Number Change FURUNO FA-150 AISShip Information / MMSI Number Change via Key Sequence 1- Access the Initial Settings Menu. 2- To unlock the password screen, press the following keys in sequence:MENU → ENTER → DISPLAY → DIMMER → NAV.STATUS → MENU 3- Once the menu opens, update the ship